Bulb mode
Bulb mode (often marked “B”) keeps the shutter open for as long as you hold the release, allowing exposures longer than the usual 30-second limit.
Also known as: Bulb, B mode
Bulb mode (sometimes marked “B”) keeps the camera's shutter open for as long as the release is pressed, instead of for a preset duration. It allows exposures longer than the usual limit of manual mode (normally 30 seconds), reaching minutes or hours.
In M mode the camera decides when to close; in bulb you decide, and that's why you need a remote release.
It's the only way to go beyond 30 seconds on most cameras, and therefore the entry point to star trails, light painting and extreme long exposure.
When do you need bulb mode?
Only when the correct exposure goes beyond 30 seconds. Below that, manual mode is more convenient and more repeatable. These values assume a tripod and a moonless sky; exposure time doesn't change with sensor format, although the equivalent aperture does.
Situation: Fireworks; Typical time: 2 – 6 s per burst; Aperture: f/11; ISO: 100; What to watch for: Past 8 s the city background burns out
Situation: Light painting with a flashlight; Typical time: 30 s – 4 min; Aperture: f/8; ISO: 100; What to watch for: Wear dark clothes and don't cross the frame facing the camera
Situation: Star trails in a single shot; Typical time: 15 – 30 min; Aperture: f/4; ISO: 400; What to watch for: Under an urban sky the background burns out before 2 min
Situation: Daytime long exposure with a 10-stop ND; Typical time: ~2 min; Aperture: f/11; ISO: 100; What to watch for: Base of f/11, 1/8 s, ISO 100 at sunset
Situation: Cathedral or interior without flash; Typical time: 1 – 4 min; Aperture: f/8; ISO: 100; What to watch for: People who walk through disappear
The ND filter calculation is arithmetic: each stop of density doubles the time. A base of 1/8 s with a 10-stop ND is 1024 × 1/8 = 128 seconds, a little over two minutes. The ND filter calculator does the math so you don't have to do it from memory on the pier.
What gear do you need to shoot in bulb?
A rigid tripod and a remote release or intervalometer with a lock function. Keeping your finger on the button for two minutes transmits vibration and is uncomfortable to the point of ruining the shot. The intervalometer also keeps time: in bulb the camera doesn't count for you, and at 12 minutes you no longer know whether you're at 8 or 15.
Some recent cameras offer a “timed bulb” in the menu, where you program the exact duration and the camera closes on its own. If yours has it, it's preferable to the timer on your phone.
Common mistakes
Not covering the viewfinder on a DSLR. With your eye away from the eyepiece, light enters from behind and fogs the image with a grayish veil or a band of color. Many camera straps come with an eyepiece cover precisely for this; opaque tape works just as well. On mirrorless cameras the problem doesn't exist.
Forgetting about long-exposure noise reduction. If it's on, the camera takes a second, dark exposure of the same length to subtract thermal noise: a 10-minute shot locks up the camera for another 10. It's useful, but decide whether you want it before your window of light slips away.
Relying on a single very long shot. Half an hour of exposure is ruined by one passing car. For star trails, many stacked 30 s exposures give the same trail with the option of discarding the bad frames.
To apply it to specific night shots, see how to photograph fireworks and the guide to night photography and astrophotography.