Detail shot
A detail shot isolates part of the subject until it fills the frame: a ring, an eye, a jacket seam, a bottle label.
Also known as: close-up detail, macro detail shot
A detail shot isolates a part of the subject until it fills the frame: a ring, an eye, the seam of a jacket, the label on a bottle. It is described by reproduction ratio, not by where it cuts the body: at 1:2 with a 100 mm macro on full frame you frame 72 × 48 mm from about 30 cm, and the depth of field at f/8 is 3 mm.
At detail scale the subject fills the frame and the focus margin is measured in millimeters.
How is a detail shot measured?
By the reproduction ratio: how large the subject is on the sensor compared with its real size. At 1:1 a 24 mm object fills the short side of a full-frame sensor. At 1:4 a 96 mm object fits. The scale of shots by where they cut the body (from the extreme wide shot to the extreme close-up) ends here: the detail shot no longer shows a person, it shows a fragment.
Reproduction, distance and aperture with a 100 mm macro
Ratio: 1:4; Framing (full frame): 144 × 96 mm; Distance to subject: 50 cm; Aperture: f/8; Depth of field: about 10 mm
Ratio: 1:2; Framing (full frame): 72 × 48 mm; Distance to subject: 30 cm; Aperture: f/8; Depth of field: about 3 mm
Ratio: 1:1; Framing (full frame): 36 × 24 mm; Distance to subject: 20 cm; Aperture: f/8; Depth of field: 1 mm
Ratio: 1:1; Framing (full frame): 36 × 24 mm; Distance to subject: 20 cm; Aperture: f/16; Depth of field: 2 mm
Those distances are measured from the lens's main plane, so the free gap in front of the front element is smaller. With a 50 mm macro, the distance at 1:1 comes down to 10 cm and the lens starts to cast a shadow on the subject. Between a 50 mm macro and a 90-105 mm one, for detail shots the longer one almost always wins: double the distance leaves room for the light.
Why does my detail shot come out dark and soft?
Because of two effects that only appear at this scale. The first: the effective aperture closes down as you get closer. At 1:1 the marked f/8 behaves like f/16, so you lose two stops of light. The camera's meter measures and compensates for them on its own; with manual flash, it doesn't.
The second: at a real f/16, diffraction softens the image. That's why the useful range is between marked f/8 and f/11, and anything you need beyond that is solved by stacking shots with focus stacking instead of closing down the aperture.
In practice
Use a tripod from 1:2 on. The reciprocal-of-focal-length rule doesn't work here: magnification enlarges the shake just as it enlarges the subject, and handheld you'd need 1/500 s or more to compensate for a sway you wouldn't even notice in a portrait.
Focus by moving the camera, not the ring. From 1:2 on, turning the focus changes the magnification and forces you to recompose. Lock the focus at the ratio you want and move the whole camera a few millimeters until the important part comes into focus.
Diffuse the light. A small source 20 cm from a metallic object produces a specular reflection the size of a coin. A parchment-paper diffuser at 10 cm turns that point into a soft strip that draws the shape.
Clean the subject before shooting. At 1:1, a speck of dust in the photo measures what a pebble does at normal size.
Common mistakes
Stopping down to f/22 to gain focus. You gain a millimeter and lose sharpness across the whole image. Between f/11 and f/22 diffraction costs more than the depth gives back.
Focusing on the wrong part. With 3 mm of range you have to decide which plane rules: the edge of the ring, the stone or the inscription. All three won't fit.
Cropping a close-up and calling it a detail. A 300% crop of a photo taken at 1:8 doesn't have the rendering or the resolution of a shot taken at 1:2. The enlargement is done with the lens, not in editing.
For the rest of the technique (lighting, focusing and stacking) there's the guide to macro photography, and the framing principles that still apply at this scale are in dynamic visual composition.
The comparison of the nine shot types with focal length, distance and aperture for each is in types of photographic shots.