Hyperfocal distance
Hyperfocal distance is the focus point that maximizes depth of field, keeping everything sharp from half that distance to infinity.
Also known as: hyperfocal focusing, hyperfocal point
Hyperfocal distance is the focus point that maximizes depth of field for a given focal length and aperture: when you focus exactly there, sharpness extends from half that distance to infinity. With a 24 mm at f/11 on full frame, the hyperfocal distance falls at 1.75 m and everything comes out sharp from 0.87 m to the horizon.
The horizon doesn't get any farther away. All you achieve by focusing at infinity is throwing away half of the available depth of field.
Where do I focus for my lens?
The formula is H = f² ÷ (N × c), where f is the focal length in millimeters, N is the f-number and c is the circle of confusion (0.03 mm on full frame, 0.02 mm on APS-C). These are the values already worked out:
Focal length (full frame): 16 mm; Aperture: f/8; Hyperfocal: 1.07 m; Sharp from: 0.53 m
Focal length (full frame): 16 mm; Aperture: f/11; Hyperfocal: 0.78 m; Sharp from: 0.39 m
Focal length (full frame): 24 mm; Aperture: f/8; Hyperfocal: 2.40 m; Sharp from: 1.20 m
Focal length (full frame): 24 mm; Aperture: f/11; Hyperfocal: 1.75 m; Sharp from: 0.87 m
Focal length (full frame): 35 mm; Aperture: f/8; Hyperfocal: 5.10 m; Sharp from: 2.55 m
Focal length (full frame): 35 mm; Aperture: f/11; Hyperfocal: 3.71 m; Sharp from: 1.86 m
Focal length (full frame): 50 mm; Aperture: f/8; Hyperfocal: 10.4 m; Sharp from: 5.20 m
Focal length (full frame): 50 mm; Aperture: f/11; Hyperfocal: 7.58 m; Sharp from: 3.79 m
On APS-C, with the same real focal length and aperture, the hyperfocal distance is greater because the circle of confusion is smaller: a 16 mm at f/8 goes from 1.07 to 1.60 m. For your exact combination, use the hyperfocal distance calculator.
How do I focus on it if my lens has no scale?
Almost no modern lens has it engraved. Three ways that work in the field:
Focus on something real at that distance. With 24 mm at f/11, find a rock or a bush at a meter and a half, focus there in single-point AF and switch to manual so it doesn't move.
Use the on-screen scale. Many bodies show the focus distance in meters when you focus manually with the help of focus peaking.
Apply the lower-third rule. Focusing a third of the way into the scene gets quite close to the hyperfocal distance with a wide-angle lens, and requires no calculation.
Why does my hyperfocal photo look soft at 100%?
Because the classic circle of confusion of 0.03 mm assumes a print of about 20 × 25 cm viewed from 25 cm. On a screen at 100% with a 45 MP sensor, that criterion is too generous and infinity looks slightly soft.
When the destination is a large print or a crop, there are two honest ways out: use a stricter circle of confusion (the calculator allows it) or focus a bit beyond the hyperfocal distance, sacrificing foreground so the horizon is clearly sharp. If that isn't enough either, the way forward is focus stacking, not a smaller aperture: beyond f/11 on full frame, diffraction takes sharpness away from the whole frame.
Common mistakes
Focusing at infinity in landscapes. It throws away half the sharp zone, and the foreground pays for it.
Turning the ring all the way to the stop. Many lenses focus past infinity by design; the stop is not infinity.
Applying the full-frame table on APS-C. The values don't match: see crop factor.
Stopping down to f/16 or f/22 to shorten the hyperfocal distance. It does shorten it, and in exchange diffraction softens the whole image. See aperture.
Using it with a very close foreground. With a flower at 30 cm, no hyperfocal distance saves it; that's when you stack focus.
It is a direct application of depth of field, explained in the depth of field guide. To see it applied, see hyperfocal in practice: sharp landscapes.