Skip to content
← Glossary

Depth of field

Depth of field (DoF) is the zone of an image that looks sharp, from the nearest to the farthest point in acceptable focus.

Also known as: DoF

Depth of field (DoF) is the zone of an image that looks sharp, from the nearest to the farthest point in acceptable focus. Three things drive it: aperture (wider, less zone), focal length (longer, less zone) and distance to the subject (closer, less zone). With an 85 mm at f/1.8 and a subject at 1.5 m on full frame, the sharp zone measures about 3 cm.

Diagram of depth of field with the camera, the near limit, the focus plane and the far limit, showing that at medium distances a third of the sharp zone lies in front of the focus and two thirds behind

At medium distances there is more sharp zone behind the subject than in front. That is why focusing on the nearest eye almost never fails.

How much depth of field do I have in each scene?

All figures are for full frame, with the classic circle of confusion of 0.03 mm. For your exact combination, use the depth of field calculator.

  • Scene: Head-and-shoulders portrait; Focal length: 85 mm; Aperture: f/1.8; Distance: 1.5 m; Sharp zone: 3 cm

  • Scene: Half-body portrait; Focal length: 85 mm; Aperture: f/2.8; Distance: 3 m; Sharp zone: 20 cm

  • Scene: Three-quarter portrait; Focal length: 50 mm; Aperture: f/2; Distance: 3 m; Sharp zone: 43 cm

  • Scene: Group of five in two rows; Focal length: 35 mm; Aperture: f/5.6; Distance: 4 m; Sharp zone: 6.3 m

  • Scene: Zone focusing on the street; Focal length: 35 mm; Aperture: f/8; Distance: 3 m; Sharp zone: from 1.9 m to 7.3 m

  • Scene: Landscape at the hyperfocal distance; Focal length: 24 mm; Aperture: f/11; Distance: 1.75 m; Sharp zone: from 0.87 m to infinity

  • Scene: Life-size macro; Focal length: 100 mm; Aperture: f/8; Distance: 1:1 magnification; Sharp zone: 1 mm

Those 3 centimeters in the first portrait explain why the nose comes out sharp and the ear does not. And that millimeter in the macro explains why in macro photography almost nobody works with a single shot.

Which lever do I move first?

Distance, almost always. It has the biggest effect and is the only one that also changes the composition. Stepping back a meter in a head-and-shoulders portrait multiplies the sharp zone and saves the shot without touching a single dial.

Aperture is second: two stops, from f/1.8 to f/3.5, nearly double the sharp zone and cost two stops of light that you give back with ISO. Focal length is last, because changing it changes the entire framing.

One nuance that saves arguments: if you move back with a telephoto until you frame exactly the same as with a wide-angle lens, the resulting depth of field is very similar. What the telephoto brings is not a shallower sharp zone, but a more compressed and larger background, which is what reads as blur.

Where do I focus when the zone is very short?

On the eye closest to the camera in portraits, without exception: it is the point where the viewer's gaze goes and, with two thirds of the zone behind it, the other eye usually fits in.

In still life and product work, focus on the first third of the object. In landscapes with a foreground, apply the hyperfocal distance. And when even f/16 does not reach, the answer is to stack several shots, not to stop down further: above f/11 on full frame, diffraction takes sharpness away from the whole image.

Common mistakes

  • Shooting everything at maximum aperture. The blurred background does not make up for a half-focused face.

  • Stopping down to f/22 in landscapes. You gain a few centimeters of zone and lose definition across the whole image; see aperture.

  • Focusing and recomposing with shallow depth. At f/1.4 and 1.5 m, rotating the camera after locking focus shifts the plane enough to lose the eye. Move the AF point instead.

  • Applying full-frame figures to a cropped sensor. With the same framing, an APS-C gives more sharp zone; see crop factor.

  • Confusing depth of field with bokeh. One measures how much comes out sharp; the other describes how what is not sharp is rendered.

For the full treatment, see the guide to depth of field and the one on lens selection and creative use.

  • Blog
    Advanced Autofocus: Nail the Eye in Every Photo

    Advanced autofocus step by step: AF modes, back-button focus and what to use in each scenario for perfectly sharp portraits and action.

  • Glossary
    Vignetting

    Vignetting is the darkening of an image's corners relative to the center. It can be an optical flaw or a creative effect added in editing.

  • Guide
    Autofocus Systems

    Modern autofocus systems offer multiple zones, predictive tracking and subject detection: choose the right mode for each situation.

  • Blog
    Hyperfocal Distance in Practice: Sharp Landscapes

    Hyperfocal distance explained without formulas: how to focus landscapes so everything comes out sharp, with practical values by focal length and aperture.

  • Glossary
    Reproduction ratio (1:1 macro)

    Reproduction ratio, or magnification, is the size a subject is projected onto the sensor compared with its real size.

  • Guide
    Depth of Field in Practice

    Depth of field directs the viewer's attention and creates visual hierarchy: your most powerful storytelling tool.

  • Guide
    Autofocus Systems

    Modern autofocus systems offer multiple zones, predictive tracking and subject detection: choose the right mode for each situation.

  • Guide
    Depth of Field in Practice

    Depth of field directs the viewer's attention and creates visual hierarchy: your most powerful storytelling tool.