Aperture
Aperture is the variable opening inside the lens that controls how much light reaches the sensor.
Also known as: f-stop, f-number, lens opening, diaphragm
Aperture is the variable opening inside the lens that controls how much light reaches the sensor. It's measured in f-numbers (f/1.8, f/4, f/11…) and works the opposite of what seems intuitive: the lower the f-number, the bigger the opening and the more light comes in. Each full step on the scale —f/1.4, f/2, f/2.8, f/4, f/5.6, f/8, f/11, f/16— halves the light compared with the previous one.
The scale looks arbitrary because the numbers are powers of the square root of two. What advances regularly is the area of the hole.
What aperture do I use for each scene?
The depth-of-field figures are for full frame, a 50 mm and a subject at 3 meters. With an APS-C sensor and the same focal length and distance, the sharp zone is somewhat shallower: see the crop factor converter.
Scene: Head-and-shoulders portrait, distant background; Aperture: f/1.8 – f/2; Why: Dissolved background, subject separated; What it costs: Only one eye sharp if you get close
Scene: Portrait of two people; Aperture: f/4; Why: Both planes fit; What it costs: Less separation from the background
Scene: Group in two rows; Aperture: f/5.6 – f/8; Why: Covers the depth of the group; What it costs: You need more light or higher ISO
Scene: Street reportage; Aperture: f/8; Why: Margin to zone focus; What it costs: Very little in bright light
Scene: Landscape with foreground; Aperture: f/11; Why: Near and far both sharp; What it costs: Slow shutter speeds; tripod
Scene: Sunstar between rocks; Aperture: f/16; Why: The points form when you stop down; What it costs: Diffraction visible at 100%
In full sun at ISO 100, sunny 16 gives f/16 at 1/100 s. Each step you open forces you to double the shutter speed: f/11 at 1/200 s, f/8 at 1/400 s, f/5.6 at 1/800 s. All three exposures let through the same light and produce three different photos.
Why does the scale jump 1.4, 2, 2.8, 4?
Because the f-number is the focal length divided by the diameter of the opening, and what determines the light is the area of that circle. To halve the area you have to divide the diameter by the square root of two, which is 1.414. The whole series comes from that: each value is the previous one multiplied by 1.414.
That same definition explains a practical detail: f/2.8 on a 24 mm and f/2.8 on a 200 mm let through the same amount of light, even though the telephoto's physical hole is much larger.
Is there an optimal aperture?
Each lens performs slightly better at one point on its scale, normally two or three stops above its maximum aperture. Below that point you lose sharpness at the edges; far above it, diffraction appears, which reduces detail across the entire frame equally.
On full frame, diffraction starts to be noticeable from f/11 and is obvious at f/22. On APS-C that threshold arrives sooner, around f/8, and on Micro Four Thirds around f/5.6, because the pixel is smaller. That's why stopping down to f/22 "to get everything sharp" produces the opposite result, and the solution in landscape work is hyperfocal distance or focus stacking.
Common mistakes
Always shooting at maximum aperture. At f/1.4 and one meter away, one eye is in and the other isn't. Stop down to f/2.8 or f/4 and check in the depth of field calculator.
Stopping down to f/22 in landscapes. You gain 30 cm of sharp zone and lose sharpness across the whole image.
Forgetting shutter speed when stopping down. From f/2.8 to f/11 is four stops: 1/500 s becomes 1/30 s and the photo comes out blurred.
Expecting the same blur in any format. An f/2.8 on Micro Four Thirds gives the depth of field of an f/5.6 on full frame with the same framing.
Confusing f-number with the lens's real light transmission. In video the T-stop is used, which measures the light that actually comes out after passing through all the elements.
Aperture is one of the three pillars of the exposure triangle, along with shutter speed and ISO. To compensate for it against the other two, review common exposure mistakes and how to avoid them.