Skip to content
← Glossary

Print resolution (PPI / DPI)

Print resolution is measured in PPI or DPI (dots per inch) and tells you how many dots fit in each inch of paper.

Also known as: DPI, PPI, print size

Print resolution is measured in PPI or DPI (dots per inch) and tells you how many dots fit in each inch of paper. The quality standard for photography is 300 PPI at reading distance; at a lower density the image is still valid, but you have to look at it from farther away. The maximum size comes from a division: pixels ÷ PPI = inches.

Print size arithmetic: a 6000 by 4000 pixel file divided by 300, 240 and 150 dots per inch, with the three resulting prints drawn to scale

The same 24 MP file gives three different prints. Lowering the PPI does not destroy pixels: it moves the viewer away.

How large can I print my file?

Divide the pixels on the long side by the density and multiply by 2.54 to convert to centimeters. These are the four most common camera resolutions, with the result already worked out:

  • File: 12 MP; Pixels: 4240 × 2832; At 300 PPI: 36 × 24 cm; At 240 PPI: 45 × 30 cm; At 150 PPI: 72 × 48 cm

  • File: 24 MP; Pixels: 6000 × 4000; At 300 PPI: 51 × 34 cm; At 240 PPI: 64 × 42 cm; At 150 PPI: 102 × 68 cm

  • File: 45 MP; Pixels: 8192 × 5464; At 300 PPI: 69 × 46 cm; At 240 PPI: 87 × 58 cm; At 150 PPI: 139 × 93 cm

  • File: 61 MP; Pixels: 9504 × 6336; At 300 PPI: 80 × 54 cm; At 240 PPI: 101 × 67 cm; At 150 PPI: 161 × 107 cm

A 24 MP file easily covers everything that hangs in a home. The 45 and 61 MP only change anything if you are going to print above one meter and the viewer is going to step up close.

Why 300 PPI and not another number?

Because 300 PPI is roughly what the eye can distinguish at 25-30 cm, which is the distance at which you look at a book or a small print held in your hand. As soon as the print grows, the viewing distance grows with it and the density needed drops in the same proportion.

  • Destination: Portfolio, album, 20 × 30 cm print; Viewing distance: 30 cm; Reasonable PPI: 300

  • Destination: 50 × 70 cm picture on a wall; Viewing distance: 1 m; Reasonable PPI: 200-240

  • Destination: 1 m poster in a hallway; Viewing distance: 1.5-2 m; Reasonable PPI: 150

  • Destination: Banner or mural; Viewing distance: 3 m or more; Reasonable PPI: 60-100

Nobody looks at a three-meter mural with their nose pressed against it. Printing it at 300 PPI forces interpolation and adds nothing.

PPI is not the same as printer DPI

They are two different numbers that share a name. The image's PPI is how many of the file's pixels fall in each inch of paper. A printer's DPI for an inkjet is how many ink drops the head deposits, and it takes many drops to form a single color pixel. A printer that advertises 1440 dpi does not need a file at 1440 ppi: it still wants 240 or 300.

The "resolution" field stored in the file is only a label. Changing it from 72 to 300 without resampling does not add a single pixel; it only tells the software what size to place the image at. You can see it in the EXIF metadata alongside the rest of the technical information.

Common mistakes

  • Raising the label from 72 to 300 PPI and believing the photo is now good enough. The pixels are the same; only the number written in the file changed.

  • Interpolating before sending. Enlarging the file to double its size to "reach 300 PPI" adds invented pixels. Most labs prefer the original.

  • Cropping without looking at what is left. A 50% crop of a 24 MP file leaves it at 12 MP: the maximum print at 300 PPI goes from 51 to 36 cm.

  • Sending the file in the wrong profile. The lab usually asks for sRGB or its own profile; check what a color profile is before exporting.

  • Sharpening for screen and sending it to print. Paper absorbs some microcontrast, and a photo that looks perfect on the monitor comes out soft. Output sharpening is applied last, on the already resized copy.

Managing final files is part of the guide to file management and digital workflow. To calculate any combination, use the print size calculator and the article printing and selling photos: sizes and quality.

  • Blog
    Light Metering: Beyond the Auto Meter

    Master light metering: metering modes, exposure compensation and how an external light meter improves your accuracy.

  • Glossary
    RAW vs. JPEG

    RAW and JPEG are the two main formats in which a camera saves photos.

  • Guide
    Strategic Light Metering

    Metering systems do not know what is important in your scene: understanding each mode gives you creative control over exposure.

  • Blog
    Landscape Editing: A Complete Lightroom Workflow

    Edit landscapes in Lightroom step by step: the order of global adjustments, local corrections and export settings for natural color.

  • Glossary
    3-2-1 backup rule

    The 3-2-1 rule is the backup standard applied to photography: 3 copies of every file, on 2 different media types, with 1 stored off-site.

  • Guide
    Post-Processing: Creative Digital Development

    Post-processing doesn't fix a bad photo: it completes your artistic vision. RAW is the negative that needs interpretation.

  • Guide
    Strategic Light Metering

    Metering systems do not know what is important in your scene: understanding each mode gives you creative control over exposure.

  • Guide
    Post-Processing: Creative Digital Development

    Post-processing doesn't fix a bad photo: it completes your artistic vision. RAW is the negative that needs interpretation.