Skip to content
← Glossary

Clipping

Clipping happens when part of an image turns completely black or completely white, leaving no recoverable detail, even in a RAW file.

Also known as: blown highlights, crushed shadows, highlight clipping

Clipping (recorte) happens when an area of the image turns completely black or completely white, with no recoverable detail, even when editing the RAW file. It shows up in the histogram as information pressed exactly against the left edge (clipped shadows) or the right edge (blown highlights).

Graph relating scene brightness to the value recorded by the sensor: the response rises diagonally in the central zone but flattens at 0 below the lower threshold and at the maximum value above the upper one, and those two flat zones are the clipping

Outside the useful range, different brightnesses are recorded with the same value. There's no data to separate afterward.

That's the reason clipping can't be fixed in editing. Lowering the highlights of a blown sky doesn't bring back clouds: it spreads gray over an area where every pixel holds exactly the same number. A dark but not clipped shadow does keep differences, even if they're buried in noise.

How do I see clipping while shooting?

With two camera tools and a warning about both. The highlight warning (the areas that blink in playback) and the histogram you see on screen are calculated from the JPEG preview, not from the RAW. The RAW usually retains between a third of a stop and a full stop more information in the highlights than the screen shows you, and that margin depends on the picture profile you have set.

  • Situation: White sky at midday; What the histogram shows: Spike pressed against the right edge in all three channels; Real margin: None; What to do when shooting: Compensate −1 EV or use a graduated filter

  • Situation: White dress in the sun; What the histogram shows: Only the red or blue channel against the edge; Real margin: 1/3 to 1/2 stop in RAW; What to do when shooting: Lower by 1/3 EV and check the per-channel histogram

  • Situation: Forest interior in shade; What the histogram shows: Spike against the left edge; Real margin: 2 to 3 stops, with growing noise; What to do when shooting: Raise ISO before underexposing

  • Situation: Harsh backlight; What the histogram shows: Spikes against both edges at once; Real margin: None in a single shot; What to do when shooting: Bracketing and merging

Always look at the histogram per channel, not the luminosity one. A saturated red clips before the whole does, and the combined histogram doesn't show that.

Are highlights or shadows easier to recover?

Shadows, on most current sensors. Lifting a dark shadow in a RAW by two or three stops brings back detail with noise and sometimes with a color shift; recovering a clipped highlight brings back nothing, because there's nothing left to bring back.

Hence the habit of exposing to the right (ETTR) without touching the edge: you take advantage of the maximum available signal and leave a safety margin. The real gain depends on the sensor's dynamic range, and in high-contrast scenes no single exposure solves it.

Common mistakes

Confusing a dark photo with a photo that has clipping. A night landscape has most of its pixels to the left of the histogram and that's correct. The problem is the spike pressed against the edge, not the overall position.

Accepting clipping on the light source. A street lamp, the sun or the specular reflection on water will be blown out and should be. Trying to save them underexposes the whole scene by three stops.

Judging by the screen. At night any photo looks well exposed; at midday any photo looks dark. The histogram is the only thing that doesn't change with ambient light.

Clipping shadows when applying contrast in processing. Clipping is also manufactured in editing: pulling blacks all the way down destroys the same information as an exposure error.

What to do when the scene doesn't fit in the sensor

When both extremes clip at once, the problem is that the scene's contrast exceeds the sensor's range, and no combination of aperture, shutter speed and ISO fixes it. There are three ways out: bracketing and merging, a graduated filter, or changing the time of day. To read the histogram in seconds while shooting, see the guide to reading the histogram, the entry on histogram and the article how to read the histogram while you shoot.

  • Blog
    Manual Mode vs Aperture Priority: Which Should You Use?

    Manual mode or aperture priority: when each makes sense, with real scenarios, concrete settings and the myth of manual as the pro's mode, debunked.

  • Glossary
    Color temperature (Kelvin)

    Color temperature describes whether a light source leans orange or blue, measured in Kelvin (K). Low values are warm light and high values are cool light.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Blog
    Shutter Speed: Exposure and Motion

    Shutter speed: which value freezes or blurs each kind of movement, with a table by scenario and the most common mistakes.

  • Glossary
    Shooting modes (P, A, S, M)

    The shooting modes on the dial split control of the exposure between you and the camera: program, aperture priority, shutter priority and manual.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    HDR Techniques and Exposure Blending

    HDR isn't a filter: it's a technique for capturing the full range of highlights and shadows your eye sees but your camera can't record at once.

  • Guide
    Shutter Speeds

    Shutter speed controls light and motion: there is no universal correct speed, it depends on your artistic intent.

  • Guide
    Smart ISO: Choosing the Right ISO

    ISO adapts the camera to the available light while keeping your creative priorities: use the ideal ISO for each situation, not always the lowest.

  • Guide
    The Exposure Triangle, Step by Step

    The exposure triangle is the basis of light control: ISO, aperture and shutter speed work together as a balancing system.