Exposure triangle
The exposure triangle describes how aperture, shutter speed and ISO work together as a balancing system to determine the final exposure of a photo.
Also known as: photography triangle
The exposure triangle describes how aperture, shutter speed and ISO work together as a balancing system to determine the final exposure of a photo. Moving any of the three settings changes the amount of light captured, so you have to compensate with another of the three to keep the same brightness.
Moving one setting two stops to the right forces you to move another two stops to the left. That is the whole triangle.
Each side has its own side effect: aperture controls depth of field, shutter speed controls motion and ISO controls noise. Choosing between equivalent combinations is choosing which side effect you want.
How do I compensate one setting with another?
A stop is always double or half the light, and the three scales use the same stop. The seven rows below produce exactly the same brightness in an EV 12 scene, the light of an overcast day.
Aperture: f/2; Shutter speed: 1/1000 s; ISO: 100; What you get: Very blurred background and frozen motion
Aperture: f/2.8; Shutter speed: 1/500 s; ISO: 100; What you get: Portrait with some focus margin
Aperture: f/4; Shutter speed: 1/250 s; ISO: 100; What you get: Balance for general use
Aperture: f/5.6; Shutter speed: 1/125 s; ISO: 100; What you get: Small group with everyone sharp
Aperture: f/8; Shutter speed: 1/60 s; ISO: 100; What you get: Landscape; handheld, the risk of camera shake begins
Aperture: f/8; Shutter speed: 1/500 s; ISO: 800; What you get: Landscape with frozen action, some noise
Aperture: f/11; Shutter speed: 1/500 s; ISO: 1600; What you get: Everything sharp and noise already visible in the shadows
The first three rows and the last three give the same photo in brightness and very different photos in everything else. The equivalent exposure calculator generates that table for any starting point, and the triangle simulator shows the visual result before you spend shots.
Which of the three do I move first?
In this order, and the order is half the method:
Decide what cannot fail. Is the subject moving, or do you need everything sharp from front to back? Only one of the two rules each photo.
Fix that setting. If motion rules, set the shutter speed: 1/500 s for a running child, 1/1000 s for sports, 1/250 s for someone walking. If depth rules, set the aperture: f/8 or f/11 for landscape, f/2.8 to separate a portrait from the background.
Adjust the other until the meter balances.
Raise the ISO only if you cannot get there. It is the last resort, not the first: it is the only one of the three that worsens the file without buying anything in return.
For handheld shooting, the reciprocal rule sets the floor: the minimum shutter speed is 1 divided by the focal length. With 50 mm on full frame, 1/50 s; with that same lens on APS-C, 1/75 s because of the crop factor. It is an optimistic approximation on high-resolution sensors and with tired hands, so treat it as the limit, not the target.
Common mistakes
Leaving auto ISO with no ceiling. The camera goes up to ISO 12800 indoors before warning you, and the file arrives with noise you did not ask for. Set an upper limit in the menu: 3200 or 6400 depending on what your camera can handle.
Stopping down "for more sharpness." Past f/11 on full frame, diffraction starts to subtract detail from the whole image. More depth of field is not more sharpness.
Compensating with ISO in manual mode without looking at the rest. If the photo comes out dark because the shutter speed is too fast, raising the ISO amplifies a small signal. Lengthen the exposure or open the aperture first; ISO goes last.
For the full explanation with more numerical examples, see the guide to the exposure triangle.