Guide number (flash)
The guide number (GN) expresses a flash's maximum power as aperture times distance at ISO 100: GN = f × d.
Also known as: GN, flash guide number
The guide number (GN) expresses a flash's maximum power as the product of aperture and distance at ISO 100: GN = f × d. A flash with a guide number of 36 in meters correctly lights a subject at 9 m with f/4, at 4.5 m with f/8 and at 2.25 m with f/16. It is the specification that lets you compare flashes and calculate range before shooting.
The same power covers twice the distance at the cost of two stops of aperture.
From the formula come the two questions asked in the field: d = GN / f gives how far the flash reaches at the aperture you want, and f = GN / d gives the aperture you need for the subject in front of you.
How does it change with ISO?
The guide number is multiplied by the square root of the ISO factor. Going from ISO 100 to ISO 400 quadruples the sensitivity and doubles the GN: a flash with GN 36 behaves like one with GN 72 and reaches twice the distance at the same aperture.
Distance to subject: 2.25 m; Aperture at ISO 100: f/16; Aperture at ISO 400: f/32; Note: No common lens stops down that far: lower the power
Distance to subject: 3 m; Aperture at ISO 100: f/12; Aperture at ISO 400: f/24; Note: Intermediate values: round to the nearest click
Distance to subject: 4.5 m; Aperture at ISO 100: f/8; Aperture at ISO 400: f/16; Note: Comfortable flash portrait distance
Distance to subject: 9 m; Aperture at ISO 100: f/4; Aperture at ISO 400: f/8; Note: Practical limit indoors
Distance to subject: 18 m; Aperture at ISO 100: f/2; Aperture at ISO 400: f/4; Note: Theoretical maximum range, with no margin
All of those values are at full power, with the head straight and no modifiers. A diffuser costs about one stop and a bounce flash invalidates the entire calculation, because the distance the light travels is no longer the distance to the subject. The guide number calculator does the arithmetic with the ISO and distance you give it.
Why don't two flashes with the same GN perform the same?
Because the number depends on the zoom position of the head, and not all manufacturers publish it the same way. A flash with the head in telephoto position concentrates the beam into a narrower angle and gives a higher guide number without emitting more light: it covers less of the frame with more intensity.
When comparing two models, look for the zoom position and the ISO at which each number was measured. A GN 60 advertised at 200 mm zoom and a GN 36 measured at 35 mm can be very similar flashes. If the manufacturer doesn't say, the figure isn't comparable.
Common mistakes
Applying it with TTL active. With TTL metering the flash decides its own power; the guide number is for calculating in manual, which is where you're in control.
Forgetting that the flash doesn't light the background. The GN tells you how to expose the subject. What's behind is exposed by ambient light, and controlled by shutter speed, as seen in night portraits with flash and ambient light.
Confusing meters with feet. A GN of 118 in feet equals 36 in meters. Check the unit before dividing.
Counting on maximum range. At the limit distance the flash works at full power on every shot, with long recycle times and no margin to correct.
What to calculate before shooting
With the aperture you've already chosen for depth of field, divide the GN by that aperture and you'll know how far away you can stand. If that distance doesn't fit the framing, what moves is the ISO. For complete flash use, see the guide to flash lighting and the entry on fill light.