Skip to content
← Glossary

Polarizing filter (CPL)

A polarizing filter (CPL, circular polarizer) cuts reflections on non-metallic surfaces like water, glass and foliage, and deepens the color of blue sky.

Also known as: CPL, circular polarizer, polarizer

A polarizing filter (or CPL, circular polarizer) reduces reflections on non-metallic surfaces such as water, glass and foliage, and saturates the color of the blue sky by filtering the polarized light scattered in the atmosphere. It mounts on the lens and is rotated by hand until you find the desired effect, which varies with the angle relative to the sun.

On the left, the path of the light: a ray from the sun bounces off the water, leaves polarized in one plane and the filter with slits blocks it before it reaches the camera. On the right, a top-down view with the sun ahead and the band of maximum effect at ninety degrees to each side

Point your thumb at the sun with your index finger at a right angle: where your index finger points, the polarizer performs at its best.

How do you orient a polarizer?

Mount it, look through the viewfinder or screen and slowly turn the front ring. The effect appears and disappears every 90° of rotation, so a full half turn runs through the entire range twice. Stop where the reflection disappears, not where the sky is darkest: they are two different positions and only one solves the problem you had.

For the sky there is a literal rule of thumb: extend your thumb toward the sun and your index finger at a right angle. The area your index finger points to is the band of sky at 90° from the sun, where the scattered light is most polarized and the filter performs at its best. Facing the sun or with your back to it, the effect on the sky is practically nil.

On water and glass the governing angle is a different one: the reflection is best eliminated when you look at the surface at about 35° of inclination, Brewster's angle. Standing on a bridge, looking almost straight down, the filter barely does anything.

What does it do on each surface?

  • Surface: River or pond water; What you get: You see the bottom instead of the reflection; Where to stand: About 35° above the surface; Light cost: 1 to 2 stops

  • Surface: Shop window or window; What you get: The glass reflection disappears; Where to stand: At a diagonal, never head-on; Light cost: 1 to 2 stops

  • Surface: Foliage and wet leaves; What you get: The shine goes away and the green saturates; Where to stand: With side light; Light cost: 1 to 2 stops

  • Surface: Blue sky; What you get: Deeper blue, clouds stand out; Where to stand: At 90° from the sun; Light cost: 1 to 2 stops

  • Surface: Car paint; What you get: Controllable reflections; Where to stand: At a diagonal; Light cost: 1 to 2 stops

  • Surface: Chrome and polished metal; What you get: Nothing: metal doesn't polarize when it reflects; Where to stand: —; Light cost: 1 to 2 stops all the same

That last row is the one that surprises: the filter costs the same light even when it does nothing, so in a scene of metal and overcast sky you are just paying stops.

How much light does it take and how do I compensate?

Between 1 and 2 stops depending on the filter and its orientation. In full sun, an exposure of f/8, 1/500 s, ISO 100 becomes f/8 and 1/125 s with a 2-stop polarizer, or f/4 and 1/500 s if you prefer to keep the speed. With the camera's meter the correction is automatic, because it meters through the filter; the problem appears when that slower speed starts to move the foliage in the wind.

That cost is also used to your advantage: on a river, a polarizer is the half stop you were missing to get below 1/15 s and smooth the water without pulling out an ND filter. The ND filter calculator adds up the densities if you end up stacking the two.

Common mistakes

Using it with a wide angle. With 16 mm on full frame the frame covers more than 90° of sky, so part of it falls in the polarized band and part doesn't: an uneven dark blue patch appears that is impossible to correct. From 24 mm the problem lessens; below that, take it off.

Leaving it on all day. A polarizer forgotten on the lens costs 1 or 2 stops in every photo, including indoor ones and late-day ones, exactly when you need those stops.

Turning it to the maximum out of habit. A sky pushed to the extreme turns navy blue and unconvincing, and fully transparent water loses the sheen that gave it shape. The middle position is usually the right one.

To decide between a polarizer and an ND, see polarizer vs. ND filter: when to use each and the guide to exposure in complex landscapes.

  • Blog
    Night Portraits with Flash and Ambient Light

    Night portrait with flash: balance ambient light and flash with exact settings, rear-curtain sync, gels and a well-used guide number.

  • Glossary
    Catchlight

    A catchlight is the specular reflection of the light source in a subject's eyes in a portrait, giving the gaze life and depth.

  • Guide
    Studio Lighting Concepts

    Studio lighting is architecture with light: each source has a function and its quality depends on the relative size of the source.

  • Blog
    Boudoir Photography: Light, Poses and Confidence

    How to approach boudoir professionally: the pre-shoot conversation, written consent, window light and measured settings for full frame.

  • Glossary
    Blue hour

    Blue hour is the brief window of light just before sunrise or after sunset, when the sun is below the horizon but its light still tints the sky deep blue.

  • Guide
    Low-Light Photography

    Having little light is not a problem, it's a creative opportunity. The key is balancing ISO, aperture and shutter speed to match your creative vision.

  • Guide
    Studio Lighting Concepts

    Studio lighting is architecture with light: each source has a function and its quality depends on the relative size of the source.

  • Guide
    Low-Light Photography

    Having little light is not a problem, it's a creative opportunity. The key is balancing ISO, aperture and shutter speed to match your creative vision.

  • Guide
    Natural Light Basics for Photographers

    Natural light constantly changes in quality, direction and intensity. There is no "bad light," only light unsuited to what you are trying to communicate.

  • Guide
    Flash Lighting Without Auto Mode

    Flash doesn't just add light: it sculpts the exact mood you need by understanding the relationship between power, aperture, ISO and ambient light.

  • Guide
    Creative White Balance

    White balance is a storytelling tool: adjusting it manually lets you create atmospheres that support your visual message.

  • Guide
    Strategic Light Metering

    Metering systems do not know what is important in your scene: understanding each mode gives you creative control over exposure.