Skip to content
← Glossary

White balance

White balance corrects a photo's overall color to match the temperature of the light, measured in kelvin (K), so white objects look white.

Also known as: WB, color temperature setting

White balance is the setting that corrects a photo's overall color according to the temperature of the light illuminating it, measured in kelvin (K). Candlelight 1900 K, incandescent bulb 2800 K, clear midday 5500 K, open shade 8000 K: the camera applies the opposite shift to that light so a white object comes out white.

Two color bands: above, the temperature of light from 2000 to 10000 kelvin, from orange to blue; below, the effect of the setting on the photo, which goes the opposite way, blue when you set a low value and warm when you set a high one

The light's scale and the setting's scale run in opposite directions. That's where almost all the confusion lies.

The sensor doesn't have the eye's chromatic adaptation. You walk into a room with 2800 K bulbs and within seconds you see the white papers as white; the camera records the orange as it arrives and leaves it there until someone tells it what light there was. White balance is that instruction, and it's one of the few camera corrections that can be changed afterward in RAW at no cost.

What value do I set for each type of light?

These values are starting points: the real light in a scene mixes sources and no table replaces that. They're there so you don't start from zero.

  • Lighting condition: Candle, fire; Reference kelvin: 1900-2200 K; Equivalent preset: None; manual adjustment; What else to correct: Nothing: part of the warmth is the photo

  • Lighting condition: Incandescent bulb; Reference kelvin: 2800-3200 K; Equivalent preset: Tungsten; What else to correct: Usually needs some magenta

  • Lighting condition: Fluorescent and cheap LED; Reference kelvin: 3500-4500 K; Equivalent preset: Fluorescent; What else to correct: Green shift; correct it on the tint axis

  • Lighting condition: Clear midday; Reference kelvin: 5200-5600 K; Equivalent preset: Daylight; What else to correct: Little or nothing

  • Lighting condition: Hot-shoe flash; Reference kelvin: 5500-5900 K; Equivalent preset: Flash; What else to correct: Mixes poorly with background tungsten

  • Lighting condition: Overcast sky; Reference kelvin: 6000-7000 K; Equivalent preset: Cloudy; What else to correct: Slight adjustment toward magenta

  • Lighting condition: Open shade under a blue sky; Reference kelvin: 7500-9000 K; Equivalent preset: Shade; What else to correct: The blue is real, not an error

There's a second axis the word "kelvin" doesn't cover: tint, which runs from green to magenta. A fluorescent can be at 4000 K and still leave skin looking greenish; that defect isn't corrected by moving the temperature, it's corrected by moving the tint.

Why does raising the kelvin warm the photo?

Because the number you enter describes the light the camera assumes is there, not the result. If you tell it the scene is lit at 8000 K —very blue light— it applies an amber shift to neutralize it; if that blue light didn't exist, the amber stays and the photo comes out warm.

Hence the habit of using the setting in reverse, as a creative control: setting 7000 K on a sunset that was already warm exaggerates the orange, and setting 4000 K on a night scene cools it to blue. That use is developed in more than technique: white balance as a storytelling tool.

Common mistakes

Leaving auto on in mixed light. With a cool window and a warm lamp in the same plane, auto picks a midpoint and fails in both areas. Set a value and decide which of the two lights you want correct.

Correcting a sunrise all the way to neutral gray. If you neutralize the 3000 K of the first light, you erase exactly the reason you got up. Correct only what's excess.

Trusting the screen in sunlight. The screen's brightness and reflection change your perception of color. If color is critical, shoot a gray card at the start of the session and adjust with it afterward.

Shooting JPEG when the light is difficult. In JPEG the balance is baked into the file and correcting it degrades the color. In RAW it's a value you change at no cost; the difference is in RAW vs. JPEG.

What to decide before shooting

One fixed value per scene, not auto, if you're going to shoot a series that will be edited together later: with auto, each photo arrives with a different balance and syncing the edit stops being immediate. For values by condition and their creative use, see the guide to creative white balance, the entry on color temperature and the article white balance outdoors: a practical guide.

  • Glossary
    Light metering

    Light metering is how the camera analyzes the brightness of a scene to calculate a “correct” exposure, using matrix, center-weighted or spot modes.

  • Blog
    Low-Light Photography: ISO and Shutter Speed

    Low-light photography without noise: the order in which to set shutter speed, aperture and ISO, and your real minimum handheld speed.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Glossary
    Color temperature (Kelvin)

    Color temperature describes whether a light source leans orange or blue, measured in Kelvin (K). Low values are warm light and high values are cool light.

  • Blog
    Snow Photography: Exposure and White Balance

    Learn to photograph snow without gray or blue casts: exact exposure compensation, white balance and settings for winter landscapes and portraits.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    HDR Techniques and Exposure Blending

    HDR isn't a filter: it's a technique for capturing the full range of highlights and shadows your eye sees but your camera can't record at once.

  • Guide
    Shutter Speeds

    Shutter speed controls light and motion: there is no universal correct speed, it depends on your artistic intent.

  • Guide
    Smart ISO: Choosing the Right ISO

    ISO adapts the camera to the available light while keeping your creative priorities: use the ideal ISO for each situation, not always the lowest.

  • Guide
    The Exposure Triangle, Step by Step

    The exposure triangle is the basis of light control: ISO, aperture and shutter speed work together as a balancing system.