Skip to content
← Glossary

Exposure compensation (EV)

Exposure compensation (in stops or EV) shifts what the camera's meter treats as correct exposure without touching aperture, shutter speed and ISO one by one.

Also known as: EV compensation, exposure bias, +/- EV

Exposure compensation (in stops or EV) shifts what the camera's meter treats as correct exposure, without touching aperture, shutter speed and ISO one by one. +1 EV doubles the light reaching the sensor and brightens the image; −1 EV halves it and darkens the image. It exists because the meter assumes everything it measures is a middle gray, and snow is not.

Exposure compensation scale from minus three to plus three stops with the needle at plus one and seven tenths, and below it three histograms: uncompensated, the snow peak sits in the center; at plus one and seven tenths it shifts to the right; and at minus one and three tenths a stage spotlight leaves the peak on the left

Compensation does not correct one zone: it moves the whole exposure a whole or fractional number of stops.

The light meter measures reflected light and returns the setting that would leave that reading at a midtone. With a scene of average reflectance it gets it right. With snow, with white sand or with a black suit against a dark background, it gets the arithmetic right and the photo wrong.

How much do I compensate in each scene?

  • Scene: Snow or white sand in sun; Compensation: +1.3 to +2 EV; Why: The meter pulls them to middle gray; What to watch: Highlight clipping in the white itself

  • Scene: Backlit subject with sky behind; Compensation: +1 to +1.7 EV; Why: The background dominates the metering; What to watch: The sky blows out; that is the price

  • Scene: Portrait in shade with a lit background; Compensation: +0.7 to +1 EV; Why: Same effect, milder; What to watch: The shadow can shift to blue

  • Scene: Stage spotlight on a black background; Compensation: −1 to −2 EV; Why: The black pushes the metering upward; What to watch: That the face is not underexposed

  • Scene: Urban night scene; Compensation: −0.7 to −1.3 EV; Why: Point light sources fool the meter; What to watch: Noise if you also raise the ISO

  • Scene: Black suit or fur filling the frame; Compensation: −0.7 to −1.3 EV; Why: The meter lightens it to gray; What to watch: Losing the texture of the black

The snow figure can be checked with Sunny 16: in full sun, ISO 100, f/16 and 1/100 s is the reference for a scene of normal reflectance, and front-lit snow falls in that same environment. When you meter on the snow, the camera asks for about two stops less (f/16 at 1/400 s), which is exactly the gray you want to avoid. Compensating +1.7 EV brings you back close to the reference.

In which modes does compensation work?

In aperture priority, shutter priority and program, because in all three there is a parameter the camera still controls and can shift. In manual with fixed ISO it does nothing: all three settings are yours and the needle just moves on the screen. In manual with auto ISO it does work, and what it moves is the ISO.

What gets moved matters, because each option has its cost:

  • In aperture priority, compensation changes the shutter speed. +1 EV can take you from 1/125 s to 1/60 s and ruin a moving subject.

  • In shutter priority, it changes the aperture, and with it the depth of field.

  • In manual with auto ISO, it changes the ISO, and with it the noise.

The exposure triangle simulator teaches this relationship by moving one setting and showing what the other makes up for.

Common mistakes

Leaving it on. On many models compensation does not reset when you turn the camera off. A forgotten +2 EV from yesterday's snow blows out everything today.

Compensating by looking at the screen. In the sun, any photo looks dark. Decide with the histogram and the highlight warning.

Compensating instead of metering better. If the subject fills a third of the frame, spot metering on it solves the problem at the root without guessing stops.

Using it with flash expecting to change the flash. Exposure compensation acts on ambient light; the flash has its own separate compensation, and confusing the two leaves dark backgrounds with blown-out subjects.

How to get back to zero

Get into the habit of checking the compensation scale every time you turn on the camera, just as you check the ISO. It takes two seconds and saves the whole session from being off. For the values by scene and their logic, see the exposure compensation guide and the article exposure compensation on sand and snow.

  • Blog
    Manual Mode vs Aperture Priority: Which Should You Use?

    Manual mode or aperture priority: when each makes sense, with real scenarios, concrete settings and the myth of manual as the pro's mode, debunked.

  • Glossary
    Color temperature (Kelvin)

    Color temperature describes whether a light source leans orange or blue, measured in Kelvin (K). Low values are warm light and high values are cool light.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Blog
    Shutter Speed: Exposure and Motion

    Shutter speed: which value freezes or blurs each kind of movement, with a table by scenario and the most common mistakes.

  • Glossary
    Shooting modes (P, A, S, M)

    The shooting modes on the dial split control of the exposure between you and the camera: program, aperture priority, shutter priority and manual.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    HDR Techniques and Exposure Blending

    HDR isn't a filter: it's a technique for capturing the full range of highlights and shadows your eye sees but your camera can't record at once.

  • Guide
    Shutter Speeds

    Shutter speed controls light and motion: there is no universal correct speed, it depends on your artistic intent.

  • Guide
    Smart ISO: Choosing the Right ISO

    ISO adapts the camera to the available light while keeping your creative priorities: use the ideal ISO for each situation, not always the lowest.

  • Guide
    The Exposure Triangle, Step by Step

    The exposure triangle is the basis of light control: ISO, aperture and shutter speed work together as a balancing system.