Skip to content
← Glossary

Shutter speed

Shutter speed is how long the sensor stays exposed to light, from 1/8000 s to several minutes. It sets both the light and how motion is recorded.

Also known as: exposure time

Shutter speed is the length of time the sensor stays exposed to light, from 1/8000 s to several minutes. Each stop doubles or halves that time, and with it the light that comes in: 1/1000 s freezes a player in mid-run, 1/125 s does not; 1/4 s turns a waterfall into silk and also turns any handheld photo into a blur.

Scale of shutter speeds from 1/4000 of a second to 4 seconds, with three examples above showing a frozen subject, a subject with partial blur and a subject turned into a continuous streak, and three ranges marked below for freezing action, general handheld use and intentional motion with a tripod

The same scale does two things at once: how much light comes in and how what moves gets recorded.

The two effects go together and cannot be separated: there is no speed that freezes motion and at the same time lets in a lot of light. When you choose 1/2000 s for a race you are giving up four stops compared with 1/125 s, and that light has to come from the aperture or the ISO.

What shutter speed do I use for each subject?

What decides the number is the apparent speed of the subject in the frame, not its real speed. A train at 200 km/h a kilometer away is frozen at 1/250 s; a bee at 30 cm is not.

  • Subject and goal: Bird in flight, with a sharp wing; Shutter speed: 1/2000 - 1/4000 s; Result: Fully frozen; What it costs: High ISO except in full sun

  • Subject and goal: Team sports; Shutter speed: 1/1000 s; Result: Frozen; What it costs: ISO 800-3200 indoors

  • Subject and goal: Child running toward you; Shutter speed: 1/500 s; Result: Frozen; What it costs: At 1/125 s it comes out blurred

  • Subject and goal: Person walking; Shutter speed: 1/250 s; Result: Frozen; What it costs: Nothing relevant

  • Subject and goal: Still portrait handheld with 50 mm; Shutter speed: 1/125 s; Result: Sharp; What it costs: Reciprocal rule met

  • Subject and goal: Panning a cyclist; Shutter speed: 1/30 - 1/60 s; Result: Sharp subject, blurred background; What it costs: Half the shots get discarded

  • Subject and goal: Waterfall with a silky effect; Shutter speed: 1/2 - 2 s; Result: Smooth, continuous water; What it costs: Tripod and, in daylight, an ND filter

  • Subject and goal: Car light trails at night; Shutter speed: 5 - 20 s; Result: Continuous lines of light; What it costs: Tripod and remote release

In full sun, ISO 100 and f/2.8 land around 1/3200 s: f/2.8 lets in five stops more light than the f/16 of the Sunny 16 reference (1/100 s). That is the real margin you have to freeze without raising the ISO, and it explains why indoor sports need fast lenses.

What is the minimum handheld shutter speed?

The reciprocal rule says 1/focal length: 1/50 s with a 50 mm, 1/200 s with a 200 mm. It is an approximation with two limitations. It was formulated for film and small prints, so on a high-resolution sensor viewed at 100% you should go up a stop; and it does not account for stabilization, which in current lenses and bodies lets you go down two or three stops with still subjects.

Below 1/30 s handheld, even with a stabilizer, some of the shots will come out blurred and no setting fixes it: what the stabilizer corrects is your shake, not the subject's movement. On APS-C, apply the rule to the equivalent focal length, not the nominal one.

There is a third kind of shake that no rule covers: the ground's. On a windy lookout, on a bridge or on a light tripod, exposures of 1 s or more pick up vibrations that do not come from your hands. The two-second timer, the electronic shutter and hanging your backpack from the tripod help there.

Common mistakes

Trusting the stabilizer for sharpness with moving subjects. Stabilizing 1/15 s leaves the background sharp and the person blurred.

Raising the shutter speed without looking at the rest. Every stop you gain has to be given back by opening the aperture or raising the ISO; that relationship is the exposure triangle and you can see it by moving the settings in the simulator.

Exceeding the flash sync speed. Above 1/200 or 1/250 s, depending on the body, a black band appears except in high-speed mode.

Using 1/125 s for everything. It is convenient, and it is the most frequent reason for almost-sharp photos that never quite get there.

What to settle before shooting

The minimum acceptable shutter speed for your subject, and from there let auto ISO do the rest with a ceiling you set. For values by scene, see the guide to shutter speeds, the entry on panning and the article sharp handheld photos: minimum shutter speed.

  • Blog
    Manual Mode vs Aperture Priority: Which Should You Use?

    Manual mode or aperture priority: when each makes sense, with real scenarios, concrete settings and the myth of manual as the pro's mode, debunked.

  • Glossary
    Color temperature (Kelvin)

    Color temperature describes whether a light source leans orange or blue, measured in Kelvin (K). Low values are warm light and high values are cool light.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Blog
    Shutter Speed: Exposure and Motion

    Shutter speed: which value freezes or blurs each kind of movement, with a table by scenario and the most common mistakes.

  • Glossary
    Shooting modes (P, A, S, M)

    The shooting modes on the dial split control of the exposure between you and the camera: program, aperture priority, shutter priority and manual.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    Exposure in Complex Landscapes

    Landscapes pose the biggest dynamic range challenge: your sensor can't capture everything you see, so you must decide which tones to preserve.

  • Guide
    Exposure Compensation: How and When to Use It

    Exposure compensation lets you make a photo come out lighter or darker than the reading your camera calculates automatically.

  • Guide
    HDR Techniques and Exposure Blending

    HDR isn't a filter: it's a technique for capturing the full range of highlights and shadows your eye sees but your camera can't record at once.

  • Guide
    Shutter Speeds

    Shutter speed controls light and motion: there is no universal correct speed, it depends on your artistic intent.

  • Guide
    Smart ISO: Choosing the Right ISO

    ISO adapts the camera to the available light while keeping your creative priorities: use the ideal ISO for each situation, not always the lowest.

  • Guide
    The Exposure Triangle, Step by Step

    The exposure triangle is the basis of light control: ISO, aperture and shutter speed work together as a balancing system.